1. UKM Learning and Research Repository
  2. Journal Article / Artikel Jurnal
  3. Journal Content Pages/ Kandungan Halaman Jurnal
Please use this identifier to cite or link to this item: https://ptsldigital.ukm.my/jspui/handle/123456789/578266
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMohd Noor Halmy (UITM)
dc.contributor.authorSiti Khadijah Alias (UITM)
dc.contributor.authorRadzi Abdul Rasih (UITM)
dc.contributor.authorMohd Ghazali Mohd Hamami (UITM)
dc.contributor.authorNorhisyam Jenal (UITM)
dc.contributor.authorSiti Aishah Taib (UITM)
dc.date.accessioned2023-11-06T02:59:44Z-
dc.date.available2023-11-06T02:59:44Z-
dc.date.issued2017-08
dc.identifier.issn0128-7680
dc.identifier.otherukmvital:115787
dc.identifier.urihttps://ptsldigital.ukm.my/jspui/handle/123456789/578266-
dc.descriptionThis study focuses on the effect of boronizing medium on the boride layer thickness of pack boronized 304 stainless steel after surface modification. Pack boronizing treatment was conducted in temperature of 900oC for a duration of eight hours. The treatment was performed using two different boronizing mediums which are powder and paste inside a tight box in an induction furnace. The characteristics of the samples were then observed using optical microscopy and XRD analyser. The thickness of boride layer was then measured using MPS digital image analysis software. The results showed that boronizing medium significantly affected the thickness of boride layer as paste boronized samples exhibited thicker boride layer thickness. The enhancement was mainly due to the size of boron particle in the paste medium which was smaller than powder medium that enabled better diffusion. It is expected that the enhancement of the boride layer thickness would result in further improvement of the mechanical and wear properties of this material.
dc.language.isoen
dc.relation.haspartPertanika Journals
dc.relation.urihttp://www.pertanika.upm.edu.my/regular_issues.php?jtype=2&journal=JST-25-S-8
dc.subject304 stainless steel
dc.subjectBoron diffusion
dc.subjectBoronizing
dc.subjectBoride layer thickness
dc.titleEffect of boronizing medium on boron diffusion of surface modified 304 stainless steel
dc.typeJournal Article
dc.format.volume25
dc.format.pages11-18
dc.format.issueSpecial Issue
Appears in Collections:Journal Content Pages/ Kandungan Halaman Jurnal

Files in This Item:
File Description SizeFormat 
ukmvital_115787+Source01+Source010.PDF1.45 MBAdobe PDFThumbnail
View/Open
Show simple item record Recommend this item


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.