Please use this identifier to cite or link to this item:
https://ptsldigital.ukm.my/jspui/handle/123456789/515019Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.advisor | Burhanuddin Yeop Majlis, Prof. Dato' Dr. | - |
| dc.contributor.author | Rosminazuin Ab Rahim (P42406) | - |
| dc.date.accessioned | 2023-10-16T07:53:47Z | - |
| dc.date.available | 2023-10-16T07:53:47Z | - |
| dc.date.issued | 2012-08-03 | - |
| dc.identifier.other | ukmvital:120118 | - |
| dc.identifier.uri | https://ptsldigital.ukm.myjspui/handle/123456789/515019 | - |
| dc.description | The research developments in biosensor are progressing tremendously, not only contributed by arising security and medical concern in the society but also rapid advancements in Micro Electro Mechanical System (MEMS) technology. Among the developed micron-sized biosensor devices in MEMS technology, microcantileverbased biosensors are identified as the most promising candidates for its high sensitivity, high resolution and label-free molecular recognition. Integrated with onchip piezoresistive readout scheme, the microcantilever biosensor provides promising developments in the integration of MEMS portable analytical device. However, the realization of the piezoresistive microcantilever biosensor through various microfabrication techniques is not straightforward. Microcantilever sensor typically comes in a rectangular shape which usually comprises of two layers of piezoresistor and microcantilever. This design has its fabrication issue such as an interfacing problem between the piezoresistive and microcantilever layers and complex fabrication process. Therefore, this work attempts to provide the process development of effective design of piezoresistive microcantilever (PRM) biosensor through simple and reliable fabrication processes using bulk micromachining technique. This work focuses on simulation design, process definition and fabrication process of a singlelayer piezoresistive microcantilever biosensor. In this work, a novel paddle-like microcantilever structure with 50 μm x 50 μm square hole located at the clamped edge is proposed. The incorporated square hole acts as a stress concentration region by maximizing the Mises stress value. The design consideration is analyzed and verified using a finite element solver, CoventorWare 2008. At a dimension of 450 μm x 150 μm x 2 μm, a mechanical displacement of 5 μm for 1 μN applied load results in sensitivity of ΔR/R of 4.84 x 10-3. The development of single-layer doped silicon piezoresistive microcantilever with dual-leg rectangular microcantilever does not only simplify the fabrication process due to reduced fabrication steps, but also conveniently eliminates the interfacing problem that commonly exists in multilayer structures. Connecting to on-chip Wheatstone bridge circuitry, the dual-leg design of the device also ensures efficient current distribution in the piezoresistive microcantilever sensor at relatively higher sensitivity compares to typical rectangular-shaped microcantilever. In the microcantilever release process using KOH bulk etching, the utilization of a newly developed protective coating, ProTEK PSB provides an alternative to conventional silicon nitride mask. The polymeric coating does not only facilitates the fabrication process but also paves the way for simpler and cheaper fabrication process in bulk micromachining technology for other MEMS devices as the deposition and patterning steps of the costly PECVD silicon nitride mask can be simply eliminated. The fabricated device shows a resistance change of 0.3 Ω at the applied force of 0.2 μN which represents the interaction force commonly found in biosensing application. In conclusion, a reliable process development of single-layer doped silicon piezoresistive microcantilever biosensor using bulk micromachining technique is successfully realized.,Certification of Master's / Doctoral Thesis" is not available | - |
| dc.language.iso | eng | - |
| dc.publisher | UKM, Bangi | - |
| dc.relation | Institut Kejuruteraan Mikro dan Nanoelektronik (IMEN) / Institute of Microengineering and Nanoelectronics | - |
| dc.rights | UKM | - |
| dc.subject | BioMEMS | - |
| dc.subject | Biomedical materials | - |
| dc.subject | Microelectromechanical systems | - |
| dc.subject | Biosensors | - |
| dc.subject | Universiti Kebangsaan Malaysia -- Dissertations | - |
| dc.subject | Dissertations, Academic -- Malaysia | - |
| dc.title | Process development for piezoresistive microcantilever biosensor using bulk micromachining technique | - |
| dc.type | Theses | - |
| dc.format.pages | 236 | - |
| dc.identifier.callno | TK7875.R647 2012 3 tesis | - |
| dc.identifier.barcode | 004059(2019) | - |
| Appears in Collections: | Institute of Microengineering and Nanoelectronics / Institut Kejuruteraan Mikro dan Nanoelektronik (IMEN) | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| ukmvital_120118+SOURCE1+SOURCE1.0.PDF Restricted Access | 18.73 MB | Adobe PDF |  View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.