1. UKM Learning and Research Repository
  2. Research Data / Data Penyelidikan
  3. Physics, Engineering and Material Science
Please use this identifier to cite or link to this item: https://ptsldigital.ukm.my/jspui/handle/123456789/391021
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAl Basir
dc.contributor.authorAbu Bakar Sulong
dc.contributor.authorNashrah Hani Jamadon
dc.contributor.authorNorhamidi Muhamad
dc.date.accessioned2023-05-12T06:32:05Z-
dc.date.available2023-05-12T06:32:05Z-
dc.date.issued2022
dc.identifier.urihttp://ptsldigitalv2.ukm.my:8080/jspui/handle/123456789/391021-
dc.descriptionThe tensile data of the two-component micro-specimens fabricated using stainless steel 17-4PH and Zirconia materials on the grounds of two-component micro-powder injection molding process were obtained following MPIF standard 10 using a universal testing machine (model 5566, INSTRON, Norwood, MA, USA) at a 0.1 mm/min rate with a 1 KN load cell. These data were required to understand the bonding strength of the fabricated samples.
dc.description.sponsorshipUniversiti Kebangsaan Malaysia grant number DIP-2020-008; Ministry of Higher Education Malaysia grant number FRGS/1/2017/TK03/UKM/02/1
dc.subjectTwo-component micro-powder injection molding
dc.subject17-4PH/zirconia micro-sized components
dc.subjectSintering
dc.subjectMechanical properties
dc.titleTensile test data of sintered bi-material components processed via two-component micro-powder injection molding process
dc.description.notesBasir, A., Sulong, A.B., Jamadon, N.H. & Muhamad, N. (2022). Sintering behavior of bi-material micro-component of 17-4PH stainless steel and yttria-stabilized zirconia produced by two-component micro-powder injection molding process, Materials, 15(6), 2059.
Appears in Collections:Physics, Engineering and Material Science

Files in This Item:
File SizeFormat 
Al Basir_Tensile Strength_1 - AL BASIR.xlsx9.49 kBMicrosoft Excel XMLView/Open
Show simple item record Recommend this item


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.