1. UKM Learning and Research Repository
  2. Journal Article / Artikel Jurnal
  3. Journal Content Pages/ Kandungan Halaman Jurnal
Please use this identifier to cite or link to this item: https://ptsldigital.ukm.my/jspui/handle/123456789/578784
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSalakjit Nilborworn
dc.contributor.authorKrerkchai Thongnoo
dc.contributor.authorPornchai Phukpattaranont
dc.date.accessioned2023-11-06T03:07:37Z-
dc.date.available2023-11-06T03:07:37Z-
dc.date.issued2017-01
dc.identifier.issn0128-7680
dc.identifier.otherukmvital:116216
dc.identifier.urihttps://ptsldigital.ukm.my/jspui/handle/123456789/578784-
dc.descriptionThe purpose of this study was to identify a method to form rubber composites by incorporating natural rubber (NR) and wood ash from rubber trees with a preliminary electrical properties test. This formulation is intended to improve the rubber composites in order to obtain new materials for high voltage insulators. First, the rubber formulation and processing conditions were optimised before the composites are processed in the laboratory. Second, the interactions between the NR and wood ash were investigated with the following tests: cure time, agglomerate dispersion, SEM images, and the electrical characteristic test. In the electrical characteristic test, the experimental setup was designed for testing the frequency range from 50 Hz to 100 kHz, which is the range of high voltage power line switching frequencies. This energised transient frequency can occur due to switching operations or any other external causes in high voltage systems. Finally, the dielectric property of the rubber composites was evaluated and the equivalent circuit was formulated. The results show that the different properties tested with the new material not only correspond with the filler contents, but also with the frequencies in the transmission lines. The measured data are extracted and converted into other parameters at each frequency. The comparison results are closely matched. Moreover, the results revealed that relative permittivity and the conductivity increases the wood ash filler is increased.
dc.language.isoen
dc.publisherUniversiti Putra Malaysia Press.
dc.relation.haspartPertanika Journals
dc.relation.urihttp://www.pertanika.upm.edu.my/regular_issues.php?jtype=2&journal=JST-25-S-1
dc.rightsUKM
dc.subjectRubber composites
dc.subjectHigh voltage insulator
dc.subjectRubber formulation
dc.subjectElectrical characteristic test
dc.titleElectrical characteristics of rubber wood ash filled natural rubber at high frequency
dc.typeJournal Article
dc.format.volume25
dc.format.pages139-148
dc.format.issueSpecial Issue
Appears in Collections:Journal Content Pages/ Kandungan Halaman Jurnal

Files in This Item:
File Description SizeFormat 
ukmvital_116216+Source01+Source010.PDF2.74 MBAdobe PDFThumbnail
View/Open
Show simple item record Recommend this item


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.